MatLab model of tidal thermal power plants based on Anderson cycle. First approach
Keywords:
tidal thermal energy, Anderson cycle, mathematical modelAbstract
A tidal thermal power plant is a system capable of using of ocean thermal gradients to produce electricity. It is a thermal machine in which surface water acts as a heat source, while water extracted from the depths acts as a coolant. The aim is to mathematically model the open cycle or Anderson tidal thermal power plants located on the coast and connected to the electrical system. For that, the bibliography related to the elements that make up this plant was reviewed, each component was mathematically modeled, from the functional diagram proposed by the authors, the model of these plants was obtained in MatLab/SimulinkÒ, which allowed to determine for a given scenario the power produced by the generator and the delivery of electrical energy to the electrical system.
Downloads
References
Abreu Del Sol M. C. (2021). “Selección de sitios para la obtención de energía maremotérmica terrestre utilizando tecnología satelital”, Trabajo de Diploma, Instituto Superior de Tecnologías y Ciencias Aplicadas, Universidad de La Habana, extraído de: https://www.researchgate.net/publication/365285118
Castellano Sánchez A. O., Lago Solano R. D. y Bory Prévez H. (2022). “Programa para determinar los parámetros que caracterizan el oleaje marino y simular su comportamiento”, Ingeniería Hidráulica y Ambiental, 43(2), ISSN 2788-6050, extraído de: https://riha.cujae.edu.cu/index.php/riha/article/view/585
Cortés Falcón M. F. (2020). “Diseño de intercambiadores de calor para intensificar el proceso de obtención de glucosa en la UEB Chiquitico Fabregat”, Revista Centro Azúcar, 47: 10-21, ISSN: 2223- 4861, extraído de: https://n9.cl/syfgs
Fitzgerald A. E. (1996). “Máquinas Eléctricas”, Sexta Edición, Editorial McGraw-Hill, ISBN: 9789701040522, México, extraído de: https://www.sidalc.net/search/Record/cat-unco-ar-55152
Gil Alba R. (2017). “Estudio sobre la implantación de la tecnología maremotérmica”. Tesis de Ingeniería en Tecnologías Industriales, Universidad Carlos III de Madrid, España, extraído de: http://hdl.handle.net/10016/27764
Green D. W. and Southard M. Z. (2019). “Perry’s Chemical Engineers’ Handbook”, 9th Edition, McGraw-Hill Education, ISBN: 978-0-07-183409-4, extraído de: https://www.booksfree.org/wp-content/uploads/2022/03/perrys-chemical-engineers-handbook-ninth-edition_compressed.pdf
Heredia Díaz A., Bory Prevez H. y Castellano Sánchez A. O. (2023). “Comparación de tres esquemas de centrales maremotérmicas”, Maestro y Sociedad, 20(4): 953-958, e-ISSN 1815-4867, extraído de: https://maestroysociedad.uo.edu.cu/index.php/MyS/article/view/6187
Ishaq H. and Dincer I. (2020). “A comparative evaluation of OTEC, solar and wind energy based systems for clean hydrogen production”, Journal of Cleaner Production, 246, ISSN 0959-6526, extraído de: https://doi.org/10.1016/j.jclepro.2019.118736
Lorenzo Carralero J. E., Castellano Sánchez A. O. y Bory Prévez H. (2023). “Simulación en Matlab de dispositivos WEC”. Maestro y Sociedad, (Número Especial): 125-131, e-ISSN 1815-4867, extraído de: https://maestroysociedad.uo.edu.cu/index.php/MyS/article/view/6249
Vera D., Baccioli A., Jurado F. and Desideri U. (2020). “Modeling and optimization of an ocean thermal energy conversion system for remote islands electrification”, Renewable Energy, 162: 1399-1414, ISSN 0960-1481, extraído de: https://doi.org/10.1016/j.renene.2020.07.074
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish in this journal agree to the following terms:
a. The authors retain all copyrights and grant the journal the right to first publish the work as licensed under a Creative Commons Attribution-NonCommercial 4.0 Unported License that allows others to share the work with an acknowledgment of authorship. work and the initial publication in this journal.
b. Authors may separately establish additional agreements with the Editorial Committee for the publication of their work or a version of it in another journal, with an acknowledgment of its initial publication in this journal.
