Determination of the filling and / or emptying time of tanks in pumped source systems
Keywords:
time, filling, emptying, tanks, pumpingAbstract
In the present work, a calculation methodology is proposed to determine the filling and / or emptying times of the tanks in the pumping source systems. It focuses on solving a discrete calculation model that takes into account the main hydraulic variables that characterize three schemes or cases of design and operation in these systems. Two discrete approach calculation models are presented as a function of height and time, which are implemented in the MATLAB version R2013b numerical computing system for the comparison of different variants of the design schemes described. Both analytical procedures are used to solve a practical example where the three cases of operation are illustrated for different variants and calculation alternatives.
Downloads
References
Cabrera E. (1996). “Ingeniería Hidráulica Aplicada a los Sistemas de Distribución de Agua”, 2da Edición, Editorial Unidad Docente Mecánica de Fluidos, Universidad Politécnica de Valencia, t. 1 y 2, ISBN 978-848-94-8701-7, Valencia, España
Fuertes V. S., Pérez R., Martínez F. J. y López P. A. (2007). “Optimización del sistema formado por la estación de bombeo, la tubería de impulsión y el depósito de regulación”, Pimentel H., Pérez R. e Iglesias P. L. (2016). “Abastecimento de água: o estado da arte e técnicas avançadas”, pp.: 261-274, Editorial Universidade Federal da Paraíba, ISBN 978-85-7745-078-3, Paraíba, Brasil
Hernández J., Gómez P y Zanzi C. (2016a). “Mecánica de los Fluidos. Problemas y soluciones”, Editorial Universidad Nacional de Educación a Distancia (UNED), ISBN 978-84-362-7109-6, Madrid, España
Hernández J., Gómez P y Zanzi C. (2016b). “Máquinas Hidráulicas. Problemas y soluciones”, Editorial Universidad Nacional de Educación a Distancia (UNED), ISBN 978-84-362-7004-4, Madrid, España
Martínez Y. (2011). “Metodología para el diseño hidráulico de las estaciones de bombeo para acueducto”, Tesis de doctorado, Universidad Tecnológica de La Habana “José Antonio Echeverría”, Cujae, La Habana, Cuba
Pulido I, Gutiérrez J. C. and Asensio R. (2006). “Optimal design of pumping stations of inland intensive fishfarms”, Aquacultural Engineering, 35 (2006): 283-291, ISSN 0144-8609, Ámsterdam, Holanda
Rao H. S. and Bree D. W. (1977). “Extend Period Simulation of water systems. Part A”, Journal of the Hydraulics Division, February 1977, Volume 103, Issue 2, ISSN 0044-796X, Virginia, Estados Unidos
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish in this journal agree to the following terms:
a. The authors retain all copyrights and grant the journal the right to first publish the work as licensed under a Creative Commons Attribution-NonCommercial 4.0 Unported License that allows others to share the work with an acknowledgment of authorship. work and the initial publication in this journal.
b. Authors may separately establish additional agreements with the Editorial Committee for the publication of their work or a version of it in another journal, with an acknowledgment of its initial publication in this journal.
