Filling and/or emptying of reservoirs in pumped well systems. Part III
Keywords:
Filling, emptying, tanks, source systems, pumping, comparisonAbstract
In this paper, a comparison is made between the analytical model and the discrete model for the calculation of tank filling and/or emptying times in pumped source systems, for the three typical operation schemes that are presented in practice. Both calculation methodologies are compared for 22 variants covering the three typologies of design and operation in these systems, using for this purpose the MATLAB tool version R2024b. It is shown that the two procedures yield approximate values in most of the variants for the three cases of study, with the exception of when the characteristic coefficient of the conduction is zero. Analyzing the advantages and disadvantages of both models, it is concluded that the discrete method, which accurately represents the hydraulic phenomenon of the temporal simulation of the process, is the procedure that provides the most accurate solutions.
Downloads
References
Ballart D. (2018). “Determinación de los tiempos de llenado y/o vaciado de los depósitos en los sistemas fuentes por bombeo”, Trabajo de diploma, Facultad de Ingeniería Civil, Universidad Tecnológica de La Habana “José Antonio Echeverría”, Cujae, La Habana, Cuba
Martínez Y. (2011). “Metodología para el diseño hidráulico de las estaciones de bombeo para acueducto”, Tesis de doctorado, Universidad Tecnológica de La Habana “José Antonio Echeverría”, Cujae, La Habana, Cuba
Martínez Y. y Marón D. E. (2023). “Determinación del tiempo de llenado y/o vaciado de depósitos en sistemas fuentes por bombeo”, Revista Ingeniería Hidráulica y Ambiental, XLIV (4): 75-88, Universidad Tecnológica de La Habana “José Antonio Echeverría”, Cujae, ISSN-L:1680-0338, La Habana, Cuba
Martínez Y. y Marón D. E. (2024). “Llenado y/o vaciado de depósitos en sistemas fuentes por bombeo. Parte II.”, Revista Ingeniería Hidráulica y Ambiental, XLV (4): 55-67, Universidad Tecnológica de La Habana “José Antonio Echeverría”, Cujae, ISSN-L:1680-0338, La Habana, Cuba
Sterling SIHI (2003). “Principios básicos para el diseño de instalaciones de bombas centrífugas” (monografía), Sterling Fluid Systems Group, 7ma edición, Madrid, España. Extraído de: https://www.sterlingsihi.com/cms/es/Spain/home/navegacion-rapida/descargas/libros.html en abril de 2024
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish in this journal agree to the following terms:
a. The authors retain all copyrights and grant the journal the right to first publish the work as licensed under a Creative Commons Attribution-NonCommercial 4.0 Unported License that allows others to share the work with an acknowledgment of authorship. work and the initial publication in this journal.
b. Authors may separately establish additional agreements with the Editorial Committee for the publication of their work or a version of it in another journal, with an acknowledgment of its initial publication in this journal.
